How To Dot Hunter Douglas Ceilings

Hunter Douglas ceilings provide soundproofing and visual interest. Stippling intends to tap easily with a special brush to create a structured effect. Whether you repair a roof or paint a whole new surface, there are some techniques that you need to know to dump a roof.

Wood Hunter Douglas Ceilings

Instructions

Prepare the hunter Douglas ceilings by applying a base layer of paint to the desired color. Even if you can use some dull color, please dye paint until it dries, make the job easier and help avoid missing missed spots. Allow the ceiling for at least 48 hours to dry before proceeding to the next step. Mix your roof clay properly. To get the consistency you want for your broken roof, it’s best to use a product specially made for ceilings, available from any hardware store. It will be thick and difficult to work with in the beginning. Use the drill and mixing attachment to mix the clay until it is smoother.

Make a small selection on board before tackling the roof. Stippling is not hard, but to get a uniform pattern, it’s best to use a practice surface to get your technique down. Stipple the practice card using a round bump brush and light draw. Carefully wipe the roof with clay faucets. If the texture is too thick, scrape the clay with a palette and start over. Start in the roof. Using a robust ladder or scaffold, use the same technology on the roof. It is best to divide the work into squares of approximately one foot square. This will help you achieve even consistency across the hunter Douglas ceilings. If you make a mistake, just scrape it and try again.

READ  Best Crown Molding for 10 Foot Ceiling

12 How To Dot Hunter Douglas Ceilings Photos